Product Description
Memory card:
. Type: SD card (included)
. Support capacity: 128MB-2GB
. File format: BOLD file format
. Saving files: * .led
Physical parameters:
. Temperature: -40-85 degrees
. Working Volgate: 110-240VAC
. Power: 3W
Characteristics:
1. 256 gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller,8Ports output,can support 8192Pixel lights.
4. Off-line control,play back contents stored in the SD card
5. T-8000 stores a maximum of 16 documents
6. The digital display,the matching chip models can be seen,
7. Rainproof function,you can hang it outdoors.
Great for control decoration,advertising led pixel lights,etc.
1 * led controller
1*256MB sd-karte
T8000AC Programming Controller Spi Controller Symphony Controller Multiple Synchronous Controllers
1. System features 1. 32-65536 gray scale control,software Gamma correction processing. 2. Support various point,line and surface light sources,support various rules,and special-shaped processing. 3. The controller port is 1024,8 ports can carry 8192 pixels. 4. Compatible with single- and dual-wire ICs. When connecting single-wire IC lamps,there is no need to connect the CLK clock line. 5. The data line of the lamp is connected to DAT,the clock line is connected to CLK,and the negative pole is connected to GND. Note: 1. When the controller port is loaded with 512 lights,the playback speed can reach 30 frames per second. When the port is loaded with more than 512/1024 lights,the frame rate will automatically decrease as the number of lights increases. 2. For TTL signal output,the controller must provide ground to the lamp (that is,connect the ground wire output of the controller and the ground wire of the lamp together). By default,the signal output by this controller is a TTL signal.
2. Button function 1. SPEED+ button,speed up the playback speed S-19. 2. SPEED- key,slow down the playback spee
. Type: SD card (included)
. Support capacity: 128MB-2GB
. File format: BOLD file format
. Saving files: * .led
Physical parameters:
. Temperature: -40-85 degrees
. Working Volgate: 110-240VAC
. Power: 3W
Characteristics:
1. 256 gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller,8Ports output,can support 8192Pixel lights.
4. Off-line control,play back contents stored in the SD card
5. T-8000 stores a maximum of 16 documents
6. The digital display,the matching chip models can be seen,
7. Rainproof function,you can hang it outdoors.
Great for control decoration,advertising led pixel lights,etc.
1 * led controller
1*256MB sd-karte
T8000AC Programming Controller Spi Controller Symphony Controller Multiple Synchronous Controllers
1. System features 1. 32-65536 gray scale control,software Gamma correction processing. 2. Support various point,line and surface light sources,support various rules,and special-shaped processing. 3. The controller port is 1024,8 ports can carry 8192 pixels. 4. Compatible with single- and dual-wire ICs. When connecting single-wire IC lamps,there is no need to connect the CLK clock line. 5. The data line of the lamp is connected to DAT,the clock line is connected to CLK,and the negative pole is connected to GND. Note: 1. When the controller port is loaded with 512 lights,the playback speed can reach 30 frames per second. When the port is loaded with more than 512/1024 lights,the frame rate will automatically decrease as the number of lights increases. 2. For TTL signal output,the controller must provide ground to the lamp (that is,connect the ground wire output of the controller and the ground wire of the lamp together). By default,the signal output by this controller is a TTL signal.
2. Button function 1. SPEED+ button,speed up the playback speed S-19. 2. SPEED- key,slow down the playback spee
Product Information
- 1
