Product Information
- [PRODUCT] Includes 100 1/4 inch [8/32"] (#14 screw) x 5 inch long Screw Anchors, 1 Drill Bit & 1 Screwdriver Bit so you are ready to tackle your Commercial, DIY & Home improvement jobs - Heavy Duty General Purpose Versatile Fixing Screws
- [APPLICATIONS] Concrete Screws can be used for Applications including Concrete Block, Cinder Block, Mortar, Masonry, Brick, Wood, Drywall & Stucco
- [HIGH QUALITY] A High and Low Thread Design along with Wide Serrated Threads provides a Faster Drilling Speed allowing the Screw Anchor to Quickly Penetrate any Base Material
- [SELF-TAPPING TECHNOLOGY] A Diamond Point Designed Screw Tip Threads Directly into Base Materials, Eliminating the need for other Anchors or Screws
- [CORRSOION RESISTANT] A Blue Epoxy Coating can Withstand Hydrochloric Acid Corrosion for 1,000 Hours, Ensuring Long Lasting Durability. Anti-Corrosion Coating is especially useful in Hurricane or Damp Environments
- [MATERIAL] Manufactured from Heat-Treated 1022A High Strength Carbon Steel for Strength and Durability
- [SERVICE] 100% Customer Satisfaction and Money Back Guarantee & Responsive Customer Support for Returns
- Please visit our website for further technical information and to learn about the FixMaster offering https://www.myfixmaster.com/ The Diameter is 1/4", The overall Length is 5" The Thread Length is 3.33" The number of threads is 23 Setting Driver Required & included with each box of Anchors: FOR 1/4" - a 5/16" nut driver is required for driving the anchor into the base material FOR 1/4" - Each Tapcon style blue screw requires a 3/16" hole to be drilled in the base material being used (Concrete, Block, Brick & Wood). The hole should be drilled with the carbide tipped bit that is included in each box of anchors.
- Minimum Embedment: The Minimum Anchor embedment into the Base Material is 1". This means the Anchor must be installed so that a minimum of 1" of the anchor is embedded into the Base Material Fixture Hole Diameter: FOR 1/4" - The hole in the Fixture or Base Material being Fastened must be Larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16"
- Spacing between Anchors: Each anchor must be spaced a Minimum Distance of 4" from each other Anchor when measured center to center. Edge Distance: FOR 1/4" - Each anchor Cannot be installed any closer than 3" from an unsupported edge of the concrete. Maximum Fixture Thickness: The Maximum Fixture Thickness or the Maximum Thickness of the Material being Fastened for a anchor is 3.5" to 4". This will ensure that the Minimum Embedment of 1" will be met
