Product Information
- Automatic Water Level Control Float Valve: The float valve automatically refills water in your tank, pool, sink or any other container when the water falls below the valve level. Replenishment automatically stops once it reaches the valve, so it closes when water reaches the internal float. Comes with metal clip so you can install the valve on the water tank, very convenient to use
- Easy to Install: These float valves fit 1/2", 3/4" and 1" water pipes as top inlet or side inlet, the 1/2" float valve itself has 1/2" long male threads, tank float valve comes with There are 1/2" to 3/4" adapters and 1/2" to 1" adapters, no matter your pipe size is 1/2" or 3/4" or 1", you can easily use this valve. It also comes with a 1/2" female thread elbow
- Working water pressure: The float valve works at 10psi to 150psi water pressure. If the water pressure is too low or too high, the float valve will not be suitable for use and it will not work or be damaged. Working temperature: 0°C~100°C or 0-210°F. The float valve comes with a filter
- No Electricity Needed: An internal float valve allows water to flow until a specific level is reached. Once the water level reaches this height, the float valve is pushed up by the water due to buoyancy and stops the flow of water. When the water level starts to drop, the valve will open again and water will start flowing again, so no electricity is needed. The fully automatic water replenishment shut-off water tank float valve is made of food-grade material 304 stainless steel
- Please Note: If you are using any type of self-filling float indoors, make sure you have an emergency overflow system. Any type of self-filling float can eventually malfunction and cause flooding. It is best to set a minimum water flow required to maintain a full water level
