Product Description
This is a high quality projector wick, high brightness, long life, excellent visual effects, so that you can experience the same hd images as the cinema at home.
Bulb model: DT00911//DT00841
Working hours :3000-4000 hours
Warranty period :200 days
Bulb type: Projector Lamp Bulb with housing
Applicable model: for HITACHI CP-WX401 CP-WX410 CP-X201 CP-X467 CP-X206 CP-X301 CP-X306 CP-X401 CP-X450 CP-XW410 ED-X31 ED-X33 ED-X31EP ED-X33EP ED-X31GEP ED-X33GEP HCP-6780X CP-X200 CP-X205 CP-X30 CP-X300 CP-X305 CP-X308 CP-X32 CP-X400 CP-X245 CP-X417 ED-X30 ED-X32 HCP-800X HCP-80X HCP-880X HCP-6680X HCP-900X HCP-90X HCP-960X
When to change projector bulbs:
When the projector indicator light flashes orange, the projected image becomes darker or blurrier than before.When the projector is on, the message to change the light bulb will appear on the screen. In order to get a good projection effect, it is recommended that you change the light bulb.
How to replace projector bulbs:
1. Turn off the projector and unplug the power cord
2. Let the projector cool for at least an hour. The bulb is very hot after use
3. Use a screwdriver to remove the screws from the lid and slide the lampshade open
Loosen the two screws holding the bulb in place
5. Hold the bulb and pull it out straight
6. Use the opposite steps to place the new bulb back in the projector and tighten the screws
7. Reinstall the lampshade and reset the life of the bulb
8. Installation is complete
Note:
1. Before purchase, please confirm that the bulb of this projector is compatible with the projector. If you cannot find the model of the projector on the page, please contact us
2. To avoid burns, allow the projector to cool for at least 60 minutes before changing the bulb
Bulb model: DT00911//DT00841
Working hours :3000-4000 hours
Warranty period :200 days
Bulb type: Projector Lamp Bulb with housing
Applicable model: for HITACHI CP-WX401 CP-WX410 CP-X201 CP-X467 CP-X206 CP-X301 CP-X306 CP-X401 CP-X450 CP-XW410 ED-X31 ED-X33 ED-X31EP ED-X33EP ED-X31GEP ED-X33GEP HCP-6780X CP-X200 CP-X205 CP-X30 CP-X300 CP-X305 CP-X308 CP-X32 CP-X400 CP-X245 CP-X417 ED-X30 ED-X32 HCP-800X HCP-80X HCP-880X HCP-6680X HCP-900X HCP-90X HCP-960X
When to change projector bulbs:
When the projector indicator light flashes orange, the projected image becomes darker or blurrier than before.When the projector is on, the message to change the light bulb will appear on the screen. In order to get a good projection effect, it is recommended that you change the light bulb.
How to replace projector bulbs:
1. Turn off the projector and unplug the power cord
2. Let the projector cool for at least an hour. The bulb is very hot after use
3. Use a screwdriver to remove the screws from the lid and slide the lampshade open
Loosen the two screws holding the bulb in place
5. Hold the bulb and pull it out straight
6. Use the opposite steps to place the new bulb back in the projector and tighten the screws
7. Reinstall the lampshade and reset the life of the bulb
8. Installation is complete
Note:
1. Before purchase, please confirm that the bulb of this projector is compatible with the projector. If you cannot find the model of the projector on the page, please contact us
2. To avoid burns, allow the projector to cool for at least 60 minutes before changing the bulb
Product Information
- The DT00911//DT00841 replacement projector lamp bulb, sold by CTBAIER, can accurately match the equipment and has the same brightness, durability and output stability as the original factory.
- Compatible model: for HITACHI CP-WX401 CP-WX410 CP-X201 CP-X467 CP-X206 CP-X301 CP-X306 CP-X401 CP-X450 CP-XW410 ED-X31 ED-X33 ED-X31EP ED-X33EP ED-X31GEP ED-X33GEP HCP-6780X CP-X200 CP-X205 CP-X30 CP-X300 CP-X305 CP-X308 CP-X32 CP-X400 CP-X245 CP-X417 ED-X30 ED-X32 HCP-800X HCP-80X HCP-880X HCP-6680X HCP-900X HCP-90X HCP-960X replacement Projector lamp Bulb.
- The complete bulb module, with housing, can be easily replaced when the projector is off, as simple as taking out an old bulb, precise matching, without the need for a professional operator.
- Each wick of CTBAIER has undergone strict performance test before delivery, to ensure that each wick is of high quality and has a service life of 3000-4000h, so you can rest assured and safely use it.
- We are a professional manufacturer and supplier of projection light sources with many years of industry experience. We will continue to provide you with technical support and after-sales service for 200 days without any condition feedback within 12 hours.
