Product Description
Description:
Made of brass material, with high hardness, durability, good thermal conductivity and heat resistance.
The embedding nut has a guide so there is no need for a counterbore or countersink. Smooth surface, firm and uniform, easy to install.
These Knurled Insert Nut can be widely used on the injection for tightly fixing.
Can be installed by ultrasonic or heat into the plastic matrix, or formed during the injection.
Due to the embossing process on the outer diameter of the insert, it forms certain friction and bites force with the brass insert after forming, which can be fixed on the inside so that it cannot fall off. Has a certain torsion and tension.
Specification:
Material: Brass
Thread Size: M4
Overall Size: 7mm x 6mm / 0.28 inch x 0.24inch;(OD*L)
Package Content:
180Pcs x Knurled Insert Nuts
Made of brass material, with high hardness, durability, good thermal conductivity and heat resistance.
The embedding nut has a guide so there is no need for a counterbore or countersink. Smooth surface, firm and uniform, easy to install.
These Knurled Insert Nut can be widely used on the injection for tightly fixing.
Can be installed by ultrasonic or heat into the plastic matrix, or formed during the injection.
Due to the embossing process on the outer diameter of the insert, it forms certain friction and bites force with the brass insert after forming, which can be fixed on the inside so that it cannot fall off. Has a certain torsion and tension.
Specification:
Material: Brass
Thread Size: M4
Overall Size: 7mm x 6mm / 0.28 inch x 0.24inch;(OD*L)
Package Content:
180Pcs x Knurled Insert Nuts
Product Information
- [SIZE] - Thread Dia: M4; Overall Size: 7mm x 6mm / 0.28 inch x 0.24inch(LxOD)
- [MATERIAL] - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance
- [FEATURE] - The embedding nut has a guide so there is no need for a counterbore or countersink. Smooth surface, firm and uniform, easy to install.
- [ADVANTAGE] - Due to the embossing process on the outer diameter of the insert, it forms certain friction and bites force with the brass insert after forming, which can be fixed on the inside so that it will not fall off easily. Has a certain torsion and tension.
- [APPLICATION] - Can be installed by ultrasonic or heat into the plastic matrix, or formed during the injection, widely used in 3D printing injection molding to achieve tight fixation.
