Product Information
- Parameters:XH-M609 battery over discharge protection module comes with input voltage of DC 6V-30V, voltage control accuracy of 0.1V, power consumption <1.5W, product size 57*42*19mm/2.24*1.65*0.75inch, package including 2 pieces module
- Battery Protection:The low voltage cutoff module contains over-charging, over-discharging, short-circuit and over-current protection functions, and also has accurate voltage monitoring function, which can detect the battery voltage in time. When the battery voltage is insufficient or the charging is insufficient, it will automatically cut off the power to prevent the battery from over-discharging and causing damage
- Restore Factory Settings:Under the state of power disconnection, press and hold the two buttons at the same time, then power on, then the screen displays "888", which indicates that the factory settings have been restored successfully.Factory set protection value: 12V, return value: 2V
- Tips:Due to the relay size of this battery protection module is tiny and the circuit lines are very thin. The current should not be too large during actual use. If the current exceeds 8A, the relay contacts may be blown and cannot be used normally.The maximum current is 10A when the voltage is below 12V, and less than 8A when the voltage exceeds 12V
- Widely applications:All applicable voltage range of electric two-wheeled, three-wheeled vehicle battery; car battery and new energy electric vehicle battery discharge protection: all kinds of storage battery over-discharge protection; and solar energy, wind energy and other power supply systems
