Product Description
Connector A: copper Clamp Clip
Connector B: EC5 Female Plug
Wire Guage: 10 AWG
Conductor: copper
Total length: about 32cm
Input: 12V
Operating temperature: -20 ℃至+60 ℃
Support up to 15000mAh Power bank at 400Amp Current (<3 seconds)
Eazy to Use
① - Connect the red battery clamp of the jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole;
② - Plug the cord of jumper cable into the jumper starter's socket;
③ - Start the car and remove the clamps.
Do not use jump starter to start the vehicle if the number of battery indicators is less than 3 to protect the jump starter from damage.
Connector B: EC5 Female Plug
Wire Guage: 10 AWG
Conductor: copper
Total length: about 32cm
Input: 12V
Operating temperature: -20 ℃至+60 ℃
Support up to 15000mAh Power bank at 400Amp Current (<3 seconds)
Eazy to Use
① - Connect the red battery clamp of the jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole;
② - Plug the cord of jumper cable into the jumper starter's socket;
③ - Start the car and remove the clamps.
Do not use jump starter to start the vehicle if the number of battery indicators is less than 3 to protect the jump starter from damage.
Product Information
- Battery jumper cable designed to serve as a jump starter replacement cable clamp set ，Compatible with most car 12V jump portable starters, and mobile chargers to jump-start a dead or weak car battery.
- Anti-short connection protection: Connect the red clip with the black clip, when the power is on, no damage, no sparkle 。Anti-reverse charging protection: After the car is started, anti-reverse charge current is less than 1A.
- Wire: 10 AWG, Jacket: Silicone Rubber. Connector: EC5 Female Plug. Compatible with most 12V EC5 male output battery booster jumper .
- Strong alligator clamps with copper material cable，make sure great-quality and safety protection to is the more durable
- Please be careful when using this product：Do NOT reverse the operation sequence of the jump starter. this item can NOT be overloaded, check your device power before using, please. Do remove the product from the vehicle within 30 seconds after the vehicle is started, or it may cause security incidents.
