Product Information
- 【Double Sided Holographic Effects】Upgraded H1H Smooth Digit+Smooth Letter build plate can withstand high temperature up to 200℃. We recommend using PLA /PETG /TPU /ABS, if you want to print other materials, please adjust the parameters. Please use the Quiet Mode when printing the first layer to make sure the first layer is printed correctly. After 4-5 layers, you can switch to other modes.
- 【Note】After changing to our steel plate, Each time you make a print, you must first perform an auto-leveling please, and then compensate the Z-axis off set(0.04mm) of the machine, (the reason of the machine, not the steel plate).
- 【Clean the build plate】Please remove the front and back film before printing. Before each printing, please make sure the surface of the steel plate is free from any impurities, especially fingerprints and grease, if so, please clean it thoroughly with isopropyl and wipe it with a lint-free paper towel. Immediately after each print, please clean thoroughly with isopropyl and wipe with a lint-free paper towel and store in a dust-free space.
- 【Good Adhesion】The model can be firmly attached to the surface of the print bed.We used high-strength spring steel plate, with good flatness and elasticity. It's not easy to deformation after repeating bending. Please take the prints when the plate is cooling down.Please don't use any other tools to take off the models, otherwise it will damage the holographic build plate.
- 【Package Included】1 pc H7H spring steel sheet (Smooth Digit+Smooth Letter Double Sided Printing),Our double-sided textured holographic build plate print bed fit 3D printers with a platform size of 256x268mm for Kobra 3/Kobra 3 Combo.
