SazkJere Timer Delay Relay AC110-220V 10A 2200W Programmable Cycle Time Switch LED Digital Display Time Relay Module (Active Output AC110~220V)

Technical parameters:
Product Name: Time Controller
Working voltage:
DC12V 20A/240W(Max)
AC110-220V 10A/2200W(Max)
Relay type: 1 circuit normally open relay
Timing unit: seconds/minutes/hours
Timing range: 0-999, minimum measurement unit: 1 second
Cycle switch: supported
Delayed startup: supported
Delayed shutdown: supported
Infinite loop: supported
Power off save: Supported, only save settings, power on reset restart
Buzzer alarm: None
Limited cycle: 1-999 adjustable cycles
Trigger method: automatic trigger (default) / manual trigger
External trigger: Reserve an external trigger port and install a trigger device yourself
Product size: 79.5 × 42.1 × 26.5mm
Installation hole: 77 × 39.3mm
Product weight: DC12V: 45g, AC110~220V：55g
Product Functions: Timing, Delaying, Time Cycling & etc.

Code Meaning:
P0--0: power on timing for Seconds (0-999s).
P0--1: power on timing for Minutes (0-999m).
P0--2: power on timing for Hours (0-999h).
P1--0: power outage timing for Seconds
P1--1: power outage timing for Minutes
P1--2: power outage timing for Hours
P2--ON: power on priority
P2--OFF: power outage priority
P3--OFF: infinite cycle
P3--N(1~999): alternating N times (Maintain the state of the first power-on trigger program after the end of the alternating program)
P4--ON: auto triggre
P4--OFF: manual trigger (Click the R key to trigger, or you can add a part to trigger yourself)
P5--ON: lock
P5--OFF: unlock

Setting method (P5):
1. Enter the "Code Menu" and press and hold the "S" button for 6 seconds to enter
2. Click the "▲" or "▼" button to adjust parameters
3. Click the "S" key to switch codes
4. Double click the "S" button to enter the time setting
5. Set ON time: Click the "▲" or "▼" button to adjust parameters
6. Switch to Off time setting
7. Set Off time: Click the "▲" or "▼" button to adjust parameters
8. Manual trigger: P4=OFF, that is, in manual trigger mode, click the "R" button to trigger operation
9. Reserved external triggering function, requiring self welding of the connection end and external triggering device
-DC12V Reserve external trigger interface
Connection method ①: Self prepared XH-2.45-2P terminal welding, convenient for external trigger connection
Connection method ②: Weld the external triggering wire directly to the reserved interface
-AC version reserves external triggering interface
Connection method ①: Self prepared XH-2.45-2P terminal welding, convenient for external trigger connection
Connection method ②: Weld the external triggering wire directly to the reserved interface

Cyclic logic:
Cyclic alternating on/off (controlled by P2 on/off priority): On ≠ 0 Off ≠ 0
Delayed startup, maintain power on after startup (not controlled by P2 priority): On=0 Off ≠ 0
Delayed shutdown, maintaining power off after shutdown (not controlled by P2 priority): On ≠ 0 Off=0