Product Information
- 【SMP filament(4D filament) Features】The SMP filament(4D filament) made for Shape Memory Polymer Material, The Filament printed model can deform when stimulated by external heat (heated to above 60°C).it can be deformed into other forms at will. After cooling, the shape can be fixed, and reheated to above 60°C, it will return to the original shape before deformation.
- 【SMP Filament Recommend Settings】We recommend printing at a nozzle temperature of 215-230°C, a bed temperature of 50-70°C, and a printing speed of <250mm/s. fan:Turn On. Foot valve separation distance:0.2mm. Ambient temperature:Room temperature -60℃. Overhang angle critical value:60. Note:Withdrawal distance-Bambu Lab P1P uses default settings, Anycubic Kobra 2 uses 2mm, Elegoo Neptune 4 uses 8mm, and Creality printers can use specific printing settings.
- 【Note】The printed model can be deformed manually when it is heated to above 60°C. If it is not softened and deformed forcibly below 60 'c, the model may break. The overall temperature of the part to be deformed must be uniformly raised to more than 60°C, otherwise, the sample will not show shape memory performance due to local supercooling, and even lead to fracture.Do not raise the temperature above 80°C during drying and thermoplastic deformation.
- 【Compatibility and Applicability】3D Printer SMP Filament (4D filament) applies to UNMANNED AERIAL VEHICLE (UAV), CLOTHING, TOY, MEDICAL REHABILITATION, INTELLIGENT ROBOT, FURNITURE. compatible with most 1.75mm FDM 3D printers on the market. such as Bambu Lab X1/X1C/P1P/P1S/A1, ELEGOO Neptune 3 Pro/Neptune 4 Max, ANYCUBIC Kobra 2 Neo, AnkerMake M5C, Creality K1C/K1/K1 MAX, Creality Ender 3 V3 SE/Ender 3/Ender 3 S1/Ender 3 V2 Neo/Ender 3 V3 KE.etc.
- 【Usage】Please clean the printing plate before printing. It is recommended to rinse and dry it with mild detergent such as alcohol. Not all 3D printing models are suitable for 4D printing. Please choose the appropriate model for printing according to the characteristics of 4D printing. It is recommended to level the hot bed before printing.Deformed products placed in hot water will return to their original shape more easily after a period of time.
- 【Vacuum Packaging】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag, no bubbles and easy to print.Before use, please check whether there is air leakage in the package. lf there is airleakage, please dry the filament in a 60 °C oven for 2h-6h before printing, To prevent the filament from absorbing water, please store the unused consumablesunder vacuum drying conditions.
- 【Risk-Free】It is not recommended to print thicker products, as the deformation effect is not very good. If you have any product quality and printing problems, don't hesitate to contact us, we hope to solve your problem within 24 hours.
