Product Information
- The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods can braze some pipes, the small copper braze job, and the art project. The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches.
- Size: 2 mm x 250 mm/0.08 inch x 9.84 inch (Dia*L); Welding Current: 80(A); Melting Point: 710℃/1310°F; Color: Copper; Style: Round Straight Bar; Material: Phosphor Copper (L201); In the package of: 12PCS x Welding Rods
- 1. The flux is evenly distributed, and has good continuity; 2. The welding stick will not get tangled during welding and will not block the conduit; 3. There is less spatter and smog during welding, and the solder joints are firm; 4. Good fluidity during welding, strong caulking, and can flow into small spaces.
- 1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.
- For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
