Product Description
NOTE:
1.A little rust preventive oil deposits on the surface (looks a little dirty),is normal and doesn't affect the usage. Absolutely guaranteed to be a good quality new bits!
2.Insert the cutter shanks into the collets as deep as possible,leave 3mm or less shank showing.
3.Before the product is received for using, check the drill bit for cracks or chips,we provide perfect after-sales service.
4.Trial cuts should be made on waste material before starting any project.
SAFETY INSTRUCTIONS:
1.Always wear dust protection mask,eye protection in the form of goggles, safety spectacles or a visor.
2.Make sure use on a router machine for which the product is applicable.
3.Please make sure that the Router Bits and router table connections is tight and avoid loosening and causing it to throw out !!!
4. Suitable for all woodworking projects for both professionals and hobbyists.
5.Always return the cutter to its packaging after use.
6.Before each use check that the cutting tool is sharp and free from damage.
ROUTING SAFETY
1.Ensure the cutter can be used safely with the chosen router before use. Check that the cutter is fitted securely in the router collet.
2.Do not take heavy and deep cuts in one pass as this will overload the router.
31.When stated, the speed range should be adhered to. Recommended speeds are shown in shop products descriptions.
Product Information
- 🔨Route beautiful glass doors with the 3 bits router bit sizes are as follows: Profile Bit - 1-1/4" Diameter,1/2" Cutter Height,7/16" Cutter Depth;Coping Bit - 1-3/8" Diameter,1/2" Cutter Height,3/8" Cutter Depth;Rabbet Bit - 1-1/4" Diameter,1/2" Cutter Height,3/8" Cutter Depth
- 🔨 Application: The beading profile bit to cut rails and stiles and the coping bit to cope rail ends. The rabbeting bit will cut out the back of the frame to accommodate glass
- 🔨Very high grade tungsten carbide-K10 original carbide tipped,with minimal wear and longer life.Silver induction brazing for maximum strength and durability.Heat resistant coating will provide the router bits with superior wear resistance,rust and corrosion prevention
- 🔨1/2" shank made by solid steel,lower vibration for the cutter and added stability.Bearing guide ensures perfect guidance and smooth running,reduce trimming mishaps,largely reduces chipping
- 🔨Use in hand-held or table-mounted routers to mill hardwood, softwood, plywood or composites.MAX RPM 21 000
