Product Description
We have professional service, if you have any questions when purchasing Digital Gear Indicator , please contact us in time. Please confirm if the Indicator Meter Display fits your motorcycle before placing an order, to make sure you get what you want and bring you a comfortable online shopping experience.
Fitment:
For Ka&wasaki Ninja 1000 2011-2016
Description:
Name:Speed Gear Display Indicator
Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch
Feature:
Shows current gear number
Indicates current gear from 1 to max of 6. as well as a neutral indicator.
Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.
Display can be mounted anywhere
Installation:
Find the 4-pole male diagnostic connector(DLC), usually near the ECU box,It may have a removable cap and may be partially covered by black tape.
Set up:
You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear.
Raise the rear wheel off the ground by using a stand, and start the engine in Neutral.
the screen displays L, indicating that learning is started.
accelerate through the handle throttle slowly
The display will blink "1".Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear.
When the display shows "2", select second gear.
Repeat this process until all gears are thought (5 or 6).
The unit is programmed and should indicate the gears correctly.
Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional.
Reset:
If some gears are not indicated correctly, please reset gear indicator.turn on the key switch of the switch lock. When the gear indicator shows 5.4.3, turn off the key switch of the switch lock immediately, and then turn on the k
Fitment:
For Ka&wasaki Ninja 1000 2011-2016
Description:
Name:Speed Gear Display Indicator
Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch
Feature:
Shows current gear number
Indicates current gear from 1 to max of 6. as well as a neutral indicator.
Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.
Display can be mounted anywhere
Installation:
Find the 4-pole male diagnostic connector(DLC), usually near the ECU box,It may have a removable cap and may be partially covered by black tape.
Set up:
You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear.
Raise the rear wheel off the ground by using a stand, and start the engine in Neutral.
the screen displays L, indicating that learning is started.
accelerate through the handle throttle slowly
The display will blink "1".Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear.
When the display shows "2", select second gear.
Repeat this process until all gears are thought (5 or 6).
The unit is programmed and should indicate the gears correctly.
Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional.
Reset:
If some gears are not indicated correctly, please reset gear indicator.turn on the key switch of the switch lock. When the gear indicator shows 5.4.3, turn off the key switch of the switch lock immediately, and then turn on the k
Product Information
- Application: For Ka&wasaki Ninja 1000 Ninja1000 2011 2012 2013 2014 2015 2016 Motorcycle Gear Indicator Display
- MATERIAL：Made of plastic, which is for maximum durability and high reliable, exquisite craftsmanship for long time use. and resistant to high and low temperature, durable in use.
- Function：Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.
- Installation: The Digital Meter Display is installed quickly, saving you more time.
- Service: If you have any questions about Motorcycle Speed Display Meter , you can email us at any time.
