Micsig Oscilloscope HV Probe MDP Series MDP3002 200Mhz High Voltage Differential Probe BNC Interface Dual Range Selection Quick Zero USB Power Supply(MDP3002)

MICSIG High Voltage Differential Probe 100MHz(MDP700/1500/3000) / 150MHz(MDP701/1501/3001) / 200MHz(MDP702/1502/3002)
KEY FEATURES
Bandwidth:100MHz(MDP700/1500/3000) / 150MHz(MDP701/1501/3001) / 200MHz(MDP702/1502/3002)
Max. Voltage:700Vpk / 1500Vpk / 3000Vpk
5MHz Bandwidth Limit
When measuring FET switching frequency in most switching power supplies, MDP probe effectively eliminates high-frequency noise.
Quick Zero
Short-circuit the test leads, press Zero button, the probe can be zeroed very fast.
Dual Range Selection
Improves signal-to-noise ratio, meet more test requirements.
BNC Interface
Standard BNC interface, work with any oscilloscope.
USB Power Supply
Powered directly by oscilloscope's USB port via type-C cable.
Overvoltage Alarm
LED flashes, buzzer "beeps" rapidly, indicating an over-range alert.
Compact & Exquisite
Much smaller than traditional differential probes.
Excellent Bandwidth Flatness
The MDP series probe has excellent bandwidth flatness, amplitude fluctuation less than 0.5dB within its half bandwidth range, even in high frequency bands can also maintain high accuracy.
High Accuracy, High CMRR
High input impedance and low input capacitance, minimized load effect, greatly improved the accuracy of the differential signal. High common mode rejection capability, able to meet floating measurements of large common mode voltage at high frequencies.
CH1: @ 100KHz, 207.7V, output common mode signal amplitude 94.62mV, CMRR > -60dB Low Noise
Short circuit the input ends, connect to CH1. Set both attenuation ratio at 50X, vertical scale at 250mV/div, time base at 1ms, input impedance is 1MΩ, observe the noise floor:
* Noise: 40.62mV (RMS) at full bandwidth