Product Description
NODEHAWK Water pump
Precautions:
1. Do not use water or dirty water whose temperature exceeds 60 'C (the mud and sand in dirty water wil cause irrecoverable damageto the pump).
2. Non-submersible pumps are not waterproof. Do not spray water directly on the pump.Do not soak the pump in the water. Dry the pumpbodv after use.
3. Non-submersible pumps are not waterproof and cannot be used in humid places for a long time.4. Do not disassemble the pump or adjust the pump pressure setting screw by yourself (adjusting the pressure setting screw withoutauthorization may be fatal to the pump).
5. The density of the filter must be above 80 mesh (impurities will cause damageto the pump).
6. The diameter of the water spray hole must meet the specified value, otherwise the pump will be damaged
7.lease confirm the power supply before use. The power supply parameters must be consistent with the input parameters of the pump
8. lt is recommended that the cross-sectional area of the matching power cord should not be less than 0.75 square, and the length beabout 2 5M. f the line lenath is too long. vou need to increase the cross-sectional area of the power line, otherwise the output performanceof the pump will decrease due to the excessive pressure drop of the power line
Precautions:
1. Do not use water or dirty water whose temperature exceeds 60 'C (the mud and sand in dirty water wil cause irrecoverable damageto the pump).
2. Non-submersible pumps are not waterproof. Do not spray water directly on the pump.Do not soak the pump in the water. Dry the pumpbodv after use.
3. Non-submersible pumps are not waterproof and cannot be used in humid places for a long time.4. Do not disassemble the pump or adjust the pump pressure setting screw by yourself (adjusting the pressure setting screw withoutauthorization may be fatal to the pump).
5. The density of the filter must be above 80 mesh (impurities will cause damageto the pump).
6. The diameter of the water spray hole must meet the specified value, otherwise the pump will be damaged
7.lease confirm the power supply before use. The power supply parameters must be consistent with the input parameters of the pump
8. lt is recommended that the cross-sectional area of the matching power cord should not be less than 0.75 square, and the length beabout 2 5M. f the line lenath is too long. vou need to increase the cross-sectional area of the power line, otherwise the output performanceof the pump will decrease due to the excessive pressure drop of the power line
Product Information
- Main parameters of 12V water pump:: 3/9-inch hose barb ports. Vertical Suction Lift: 6.6ft (2m). Adjustable CUT-OFF Pressure: Default 87PSI(6Bar), MAX 120 PSI. It doesn't mean 1.5GPM jet at 100PSI.
- Tip: There is an arrow on the left side of the water pump electric cover indicating the direction of the water outlet. Please refer to the arrow direction to connect the water pipe,Comes with 2 tube clamps
- Water transfer pump Notice:All water pump have been strictly tested before leaving the factory, including test voltage and water pressure. Therefore, little water to be found inside this sprayer pump is normal, which will not affect your use.
- The small water pump is sealed to prevent incidental moisture and dust from entering. The pump can not run continuously more than 6 hours. Able to operate in a wet environment. Self priming function allows it to be mounted above water tank,All water pressure diaphragm pump have sealed switch and coating to prevent corrosion
- Widely Application:The diaphragm pump is widely used in agricultural and life.Ideal for marine, caravans/RV, Including garden sprinklers, lawns, showers, boat taps,RV, boats, family gardens and camping.