Product Description
ATO Digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm.
ATO Non-Contact Dynamic Force Sensor Specification:
Display: LCD display (show torque/speed/power value)
Non-linearity: 0.1%FS (Accuracy 0.001 * Capacity=Lowest Nm)
Hysteresis: 0.03%FS
Repeatability: 0.03%FS
Temperature drift on zero: ＜0.01%FS/℃
Temperature effect on output: ＜0.01%FS/℃
Power supply: DC 24V
Consumption current: ＜150mA
Load resistance: ≥2kΩ
Output torque signal: * RS485 & ±5V
Product Information
- ATO rotary torque transducer with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, ATO torque power tester can directly output standard signal to PLC, DCS and other automation control systems, **Output Signal---RS485 & ±5V
- 【Lowest Measured Value (Nm)】The non-linearity of ATO Digital non-contact rotary torque sensor : 0.1%FS (Lowest Nm=Accuracy 0.001 * Capacity)
- 【LCD Display 】Dynamic torque sensor, power supply: DC 24V, LCD display can show torque, speed and power value at the same time
- 【Starting Torque】ATO contactless design torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm
- 【Customer First 】You will be enjoyed to get free tech support on how to choose, how to wire, how to commissioning with ATO professional engineers. If you have any issue about the product or service, please don't hesitate to consult us
