Product Information
- The 1-3/8" fit Wood & Plastics Universal Oscillating Multitool Saw Blades are designed to provide high performance and versatility for cutting a variety of materials. These blades feature a universal fitment system that allows them to be compatible with most major brands of oscillating tools.
- The Saw blades are made of high carbon steel for durability and sharpness.The blades have a wide cutting surface and a plunge-cut design that enables precise and clean cuts. Whether you need to cut wood, plastic, drywall, fiberglass, or laminate flooring.
- To use these blades, follow these steps: 1. Make sure your oscillating multitool is unplugged or has its battery removed before changing blades. 2. Loosen the blade clamp screw on your tool using the hex key or a compatible one. 3. Remove the old blade from the tool and insert the new blade into the blade clamp slot. Make sure the blade is aligned with the direction of the tool's motion and is securely seated in the slot. 4. Tighten the blade clamp screw until the blade is firmly held in place. Do not overtighten the screw as this may damage the blade or the tool. 5. Plug in your tool or insert its battery and test the blade on a scrap piece of material before starting your project.
- To get the best results from these blades, follow these tips: - Use a low to medium speed setting on your tool for most cutting applications. A higher speed may cause excessive heat and wear on the blade and reduce its lifespan. - Apply a moderate amount of pressure on the blade as you cut. Do not force the blade into the material as this may cause it to bend or break. - Keep the blade at a right angle to the surface of the material as you cut. Do not twist or tilt the blade as this may cause it to jam or slip out of the cut.
- - Use a back-and-forth motion as you cut to clear out any debris and prevent clogging of the blade teeth. - Wear safety glasses, gloves, and ear protection when using these blades. Follow all safety precautions recommended by your tool's manufacturer.
- These Saw blades are made of high-quality steel and have a long-lasting cutting edge. However, they will eventually wear out and need to be replaced. To extend their life, clean them after each use with a soft cloth and store them in a dry place. Avoid cutting metal, nails, screws, or other hard materials with these blades as this may damage them.
