Product Description
The Connector Inspection Tool is a tool for testing electrical connectors in a wide range of industrial equipment. It can be used to determine the retention force of the terminals in the connector in a variety of circumstances to determine if normal operation is possible. The retention tester can also be used in other scenarios as a disassembly tool to separate terminals from connectors. Electrical system tools can be used in a variety of industries such as electronics, automotive, aerospace, medical equipment, etc. . They are also widely used in MIL connectors,(such as MIL-DTL-38999, MIL-DTL-26482, Mil-C-81659)Deutsch connectors, Harting connectors, it ensures the reliability and efficiency of electrical connectors, improves production efficiency, reduces failure rates and reduces maintenance costs. 1. Each tool was adjusted at a specific force in factory and could be re-adjusted by customer if necessary 2. Remove hand protector, loose lock nut(open-ended spanner 5/16) to allow free movement of adjustment screw 3. Put tool in tensile equipment for precise calibration If precise calibration isn't required or cant find proper a tensile equipment, you can set the tool by hand 4. Holding the tool firmly by hand on a weight indicating device, and apply axial force with a specific weight. Tool must be in a axial line with weight indicating device, and slide should pass over the indicator line 5. Adjust tool to required force by turning adjustment screw with a screwdriver Clockwise to increase and counter-clock wise to decrease, and slide should be pull back. When required value is achieved, slide should be aligns with indicator line. Hold tool in position and tighten lock nut firmly Tool is now set
6. Inspection stickers should be used to seal hand protector onto tool body, in order to avoid any unintentional touch with the adjustment screw
6. Inspection stickers should be used to seal hand protector onto tool body, in order to avoid any unintentional touch with the adjustment screw
Product Information
- Package Include:HT250-1+HT250-2+HT250-3+HT250-4+HT250-5+HT250-6 retention tester sets
- Humanised Design: Ergonomic non-slip design handle, even when long use and keep comfortable. Professional telescopic shaft design, you can see if the retention force in the connector is adequate.
- 6 PCS electrical system tools: JRready ST5241-HT250 Connector Inspection Tool Kit should be used with pin and socket test tips and must be ordered separately.
- Small & Powerful: This small electrical tool kit is easy to use.Insert the contact tester tool into the terminal head of the connector. Keep the same axis horizontal and increase the force.test instantly.
- Stand-alone Packaging: The ST5241-HT250 Electric Shock Tester is supplied in a storage box for easy carrying and in manual mode all tests can be performed by one person.
- Retention Test Calibrated Force =1.5 THRU 3.0 & 3.2 THRU 5.5 & 4.0 THRU 8.0 & 7.0 THRU 18.0 & 17.0 THRU 25.0 & 24.0 THRU 40.0