Product Description
Specification:
Phone RJ11 port specifications:
1.Voice coding: PCM coding, 64Kbps per voice
2.Crosstalk attenuation: ≥65dB
3.Balanced noise: ≤63.7dBmop
4.Insertion loss: -3 ± 0.75dB
5.Frequency characteristics: 300 to 3400 Hz (-0.6 to +3 dB)
6.Relay port (FXO): connected to the switch
7.Two-wire AC input impedance: 200+680//0.1 Ω (three components)
8.Ringing voltage: 35 ~ 150V
9.Ringing frequency: 17~60HZ
10.Return loss: 20 db
11.User Interface (FXS): Connect to the user's telephone
12.Two-wire AC input impedance: 200+680//0.1 Ω (three components)
13.User line loop resistance: less than 1KΩ (including phone)
14.Ringing voltage peak-to-peak value: 110~150V
15.Ringing frequency: 22~28HZ
16.Feed voltage: 28V
17.Feed current: 20~50mA;
18.Return loss: 20 db
19.Bell flow: AC90 plus or minus 15V
Ethernet RJ45 port specifications:
1. Rate: 100M/1000Mbps, full duplex, half duplex fully adaptive
2. Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
3. Physical interface: RJ45, support AUTO-MDIX (cross line straight line adaptive)
Power supply:
1.Working voltage AC100~240V, DC5V/2A.
2.US/EU/UK/AU power supply adapter is available.
Package include:
1x Telephone over fiber Transmitter
1x Telephone over fiber Receiver
1x FREE 3M SC/SC SM fiber patch cord.
2 x External power supply adapters
1 x Manual
Phone RJ11 port specifications:
1.Voice coding: PCM coding, 64Kbps per voice
2.Crosstalk attenuation: ≥65dB
3.Balanced noise: ≤63.7dBmop
4.Insertion loss: -3 ± 0.75dB
5.Frequency characteristics: 300 to 3400 Hz (-0.6 to +3 dB)
6.Relay port (FXO): connected to the switch
7.Two-wire AC input impedance: 200+680//0.1 Ω (three components)
8.Ringing voltage: 35 ~ 150V
9.Ringing frequency: 17~60HZ
10.Return loss: 20 db
11.User Interface (FXS): Connect to the user's telephone
12.Two-wire AC input impedance: 200+680//0.1 Ω (three components)
13.User line loop resistance: less than 1KΩ (including phone)
14.Ringing voltage peak-to-peak value: 110~150V
15.Ringing frequency: 22~28HZ
16.Feed voltage: 28V
17.Feed current: 20~50mA;
18.Return loss: 20 db
19.Bell flow: AC90 plus or minus 15V
Ethernet RJ45 port specifications:
1. Rate: 100M/1000Mbps, full duplex, half duplex fully adaptive
2. Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
3. Physical interface: RJ45, support AUTO-MDIX (cross line straight line adaptive)
Power supply:
1.Working voltage AC100~240V, DC5V/2A.
2.US/EU/UK/AU power supply adapter is available.
Package include:
1x Telephone over fiber Transmitter
1x Telephone over fiber Receiver
1x FREE 3M SC/SC SM fiber patch cord.
2 x External power supply adapters
1 x Manual
Product Information
- Extend your landline phones and Network: 4 Independent telephone lines + 2 Gigabit Ethernet (10/100/1000 Mbit/s) Autosensing port over fiber optic to far end. Gigabit Ethernet connection will over SAME fiber optic along with 4 phones.
- Suitable for Both Fiber Types (Single-mode and multimode). Single-mode (SM) fiber for a long distance up to 20 km(12.4miles), Multimode (MM) fiber for a distance up to 500m(0.31miles).
- Support Called id & Ring, even Fax Supported. No Delay Transmission and Protocol Support: Unlike VoIP products - these converters transmit signals directly over fiber cables, thus offering NO DELAYS, plus support for fax & legacy applications that is not supported by VoIP lines.
- Compact design, Durable Metal. Bilateral heat dissipation. LEDs for power supply and optical fiber link, data status indication can monitor the operating status of the system.
- Simple to Install, Plug and Play, No setup or configuration needed, SC connector for fiber optical port, RJ-11 connector for telephone ports and RJ-45 for Ethernet.
