Product Description
Dual drive extruders are very popular upgrades for all 3D printers. The extruder is screwed directly onto a Nema 17 motor and is therefore extremely easy to replace. There are 2 gears on the left and right of the filament strand, which are powered synchronously, giving the extruder an extremely high flow rate and the possibility to perform fast, precise and clean retracts. The print image is improved compared to many standard extruders with correct calibration.
All required screws and a Bowden coupling are included.
The flow rate must be calibrated after installation. There are many instructions and videos on the net. Assembly kit: the individual parts must be assembled by yourself. Assembly is simple, instructions are not included, which can be found in the net.
Filament diameter: 1.75 mm
Casing material: aluminium
Colour: red
Box contents: extruder, without motor
All required screws and a Bowden coupling are included.
The flow rate must be calibrated after installation. There are many instructions and videos on the net. Assembly kit: the individual parts must be assembled by yourself. Assembly is simple, instructions are not included, which can be found in the net.
Filament diameter: 1.75 mm
Casing material: aluminium
Colour: red
Box contents: extruder, without motor
Product Information
- Dual drive extruder for many common 3D printers
- 2 gears for double strength and even extraction
- Precise and clean retracts
- Easy to install directly on a Nema 17 motor
- Aluminium housing