Product Description
XRDS-RF KMR400 N-Male to SMA-Male Connector Coaxial Cable 10ft, Low Loss Coaxial Extension Cable.
The cable comes with a 20 year uv exposure rating, thick and heavy duty.
This premium low-loss coax cable is use to connect SMA radio sources such as modem, routers, etc. to the N connector found on many external fixed mount antennas (e.g. Yagi, directional panel, sector, fiberglass omni-directional).
N Type connector allows you to connect devices with N-Type female connectors, such as Celling Antenna, ADS-B Antenna extension cables or Surge Arrester, cell phone signal booster etc.
SMA connector allows you to connect devices with SMA female connectors, such as 4G LTE modem /router /RF Radio to Antenna etc.
Specifications:
Length:10ft
Impedance: 50 ohm
Low vswr:<1.15
Min. Bend Radius(Install): 2 in
Diameter: 0.41 in
Max.Operating Frequency: 6000MHz
Maximum tensile strength: 21.3Ib
Coax connector 1: 50 ohm SMA Male Connector
Coax connector 2: 50 ohm N Male Male Connector
N Male Adapter Material:
Inner needle: brass gold plated
Outer Shell: copper nickel plated
SMA Male Adapter Material:
Inner needle: brass gold plated
Outer Shell: brass gold plated
Notice:
NOT for use with video (Not for TV) devices.
Recommend use silicone sealing tape for where you connects for reaching a better protection if you mounts outdoor.
Package included:
1 x N Male to SMA Male Low Loss Cable
The cable comes with a 20 year uv exposure rating, thick and heavy duty.
This premium low-loss coax cable is use to connect SMA radio sources such as modem, routers, etc. to the N connector found on many external fixed mount antennas (e.g. Yagi, directional panel, sector, fiberglass omni-directional).
N Type connector allows you to connect devices with N-Type female connectors, such as Celling Antenna, ADS-B Antenna extension cables or Surge Arrester, cell phone signal booster etc.
SMA connector allows you to connect devices with SMA female connectors, such as 4G LTE modem /router /RF Radio to Antenna etc.
Specifications:
Length:10ft
Impedance: 50 ohm
Low vswr:<1.15
Min. Bend Radius(Install): 2 in
Diameter: 0.41 in
Max.Operating Frequency: 6000MHz
Maximum tensile strength: 21.3Ib
Coax connector 1: 50 ohm SMA Male Connector
Coax connector 2: 50 ohm N Male Male Connector
N Male Adapter Material:
Inner needle: brass gold plated
Outer Shell: copper nickel plated
SMA Male Adapter Material:
Inner needle: brass gold plated
Outer Shell: brass gold plated
Notice:
NOT for use with video (Not for TV) devices.
Recommend use silicone sealing tape for where you connects for reaching a better protection if you mounts outdoor.
Package included:
1 x N Male to SMA Male Low Loss Cable
Product Information
- Low Loss-- The inner conductor of this 10ft n type to sma kmr-400 cable is brass gold plated so it causes very low signal loss. Swr is less than 1.15. It could support better signal transfer with minimum signal loss over large distances and higher frequency use.
- Prevent Falling Off-- In the cable, we use quality n male to sma male connectors, the ends of which are firmly connected. We use 2.2-inch black heat-shrinkable tube and heat-shrinkable lining adhesive to connect the adapter to prevent the connector from falling off.
- Well Built Construction--The material of the male connector is gold-plated, not easy to oxidize. The waterproof PVC and the high density tinned copper braided provide top-quality, high-performance signal transfer with mini loss. 100% shield performance,100% resistance to EMI and RFI.
- Application-- This 50 ohm 400 Coax Cable could be connected from SMA Equipment to N-Type Antennas, used for 3G/4G/LTE/Ham/ADS-B/GPS/RF Radio to Antenna or Surge Arrester Use (Suitable for outdoor antenna or remote antenna connection to indoor amplifier.)
- Professional Produce -- XRDS-RF is a professional manufacture of RF coax cable, which is produce jumper cable over 10 years. Every n male to sma male coax cable was checked and tested with network analyzers confirm their quality before we send it out.
