DC-DC Isolated Step Down Module 24V-290V to 3.6V-15V Adjustable Buck Voltage Converter

1.
Descriptions:
It is a DC-DC Isolated Buck Module.It adopts wide voltage input and the output voltage is adjustable.The minimum voltage difference between the input voltage and the output voltage is 15V.
2.Feature:
1>.Support wide input voltage.
2>.The standby current is small.
3>.The product has built-in over temperature,over current,output short circuit protection,soft start.
3.
Descriptions:
1>.Product Name:DC-DC Isolated Buck Module
2>.Input Voltage:DC 22V~290V
3>.Output Voltage:DC 3.6V to 15V(adjustable)
4>.Output Current:600mA(Max)
5>.Power:6W(Max)
6>.Quiescent Current:0.5mA(typical value of 90V down to 5V).
7>.High Efficiency:96%(Max)
8>.Work Temperature:-40℃~85℃
9>.Work Humidity:5%~95%RH
10>.Size:43*21*19mm
4.Instructions:
1>.Connect the cable between the module and the power supply first,and then turn on the power.(
Notes:
If the input terminal is electrically connected,it is prone to flashover,especially when the input power voltage is high,it may even burn the module pad).
2>.After selecting a suitable power supply,use a multimeter or voltmeter to measure whether the output voltage of the module is consistent with the voltage required by the device.
3>.The electrical equipment (load) is connected to the output end of the module.
4>.If the value of the adjustable potentiometer is adjusted to be too large or too small,it will cause the LED indicator on the board to be off.At this time,you only need to adjust the value of the potentiometer to the appropriate position.
5>.When the difference between the input voltage and the output voltage is less than 15V,the LED indicator will not light.
5.Package:
1>.1pcs DC-DC Isolated Buck Module