Product Description
Specifications:
Heating Peak: ZW-300 420 ℃, the other 250 ℃
Bending Material Thickness: 1mm-6mm
Heating Width: 10-60 cm
Instructions:
1.Keep a cooling tank (barrel) of more than 30 liters.
2.First, connect the heater body and the submersible pump with a silicone hose.
3.Place the submersible pump in the cooling bucket, connect the power supply of the pump, and wait for the water to circulate out.
4.Connect the thermostat with the hot bender and connect it to 220V power supply. Adjust the knob of the thermostat controller.
5.The clockwise direction is to raise the temperature, and vice versa. When adjusting, it is not appropriate to rotate too fast in order to avoid damaging the thermostat.
6.When the heating pipe reaches the required temperature, it can place the plastic sheet which needs to be hot-bended on the heating trough.
7.When the sheet is soft enough to be folded manually, it can bend at various angles. According to the different materials, the setting time is different.
Safety precautions:
1.Product heating produces high temperature, heating components should avoid contact with human skin.
2.Please pay attention to the use of the environment, away from inflammable and explosive goods.
3.If you don't use it for a long time, please cut off the power in time.
Note:
1. The water temperature of the machine will continue to rise, please replace the cold water in time.
2. Don't drop the circulating water temperature suddenly.
3. It is recommended to adjust the heat pipe of the thermostat slowly (to red).
Packages:
1 X Acrylic PVC Bending Machine Heater
1 X Water Pump
2 X Silicone Tubes
1 X Temperature Controller
1 X Water Thermometer
Product Information
- 【Portable】This acrylic bender machine is portable-light and practical. Save space, heat-bend plastic sheets of various materials, for example, with a thickness of more than 6 mm.
- 【Safety】The power and water pipes are connected at both ends respectively. The separation of water and electricity is safe, intuitive, easy to plug and unplug, easy to collect, and easy to assemble with the workbench.
- 【No Thermal Deformation】There are water circulation cooling devices on both sides of the plastic bending strip heater to ensure that no thermal deformation occurs except for the places that need to be heated.
- 【Diversified Use】This pvc can be heated up and down by two heaters at the same time, combined with the workbench to form a hot bending machine, or used alone.
- 【Flexible Use】The temperature is adjustable-the acrylic bender machine temperature is uniform, and the water is cooled by circulating water. If the thick plate is bent or grooved, the bending angle will be more beautiful, and this 12in acrylic bending machine can be adapted to local conditions and used flexibly.
