Wire cable clamps are used to clamp a cable back on itself creating a loop. A suggested minimum of 3 clamps or clips are clamped on ensuring the end of the cable does not slip out. The clamp consists of a U-bolt, a saddle and 2 nuts. The parts are made of electro-galvanized malleable iron with zinc plating to ensure maximum corrosion and durability. Some examples of applications in which these are used are: safetying pipe, wedding,anchoring posts, squaring fence gates, making laundry lines, hanging banners, anchoring gym equipment, and endless other applications . TIP: Use an 8mm socket/nut driver to tighten the nuts. A drill may be used but make sure not to over tighten as the wire may warp. You should never use malleable clamps in critical applications because they can bend, stretch or have other manufacturing defects. Only drop forged clamps should be used for critical applications, such as guying, tie down or suspension TIP: “NEVER SADDLE A DEAD HORSE”– NEVER PLACE U-BOLT OVER THE LIVE LINE Never apply a clamp with the saddle on the dead side of the cable. Only the U-bolt should be on the dead side of the cable, where crushing will not affect the breaking strength of the hoist line.
- Meet to FF-C-450F
- Pls take off the coated part and crimp the Wire Rope Clamp on the cable together.
- The group of wire rope clamps work with 1/4inch cable,Package:10pcs.
- Malleable Electro-Galvanized Wire Rope Clips for Light Duty Applications
- Wire cable clamps are perfect for rigging rope, wire and cable in unlimited applications mainly in rigging, temporary guardrail systems, securing loads, and basically anything that involves cables