Product Information
- The Omnirial2™ is a true MIMO (±45° polarizations) dual antenna made to enhance your Multitech MultiConnect MTR-G3 signal and SINR/CINR. For best results, simply install the Omnirial2™ on a standard TV antenna pole (1.25 inch diameter recommended) as high as possible, run the included cables to your Multitech MultiConnect MTR-G3, and enjoy the better signal and faster throughput!
- This Omnirial2™ system will connect directly to your Multitech MultiConnect MTR-G3, supporting all its frequency bands and modes of operation. It is recommended even when your signal is not too low because its dual ±45° polarization antenna elements will increase the signal-to-noise (SINR/CINR) ratio for better download and upload data rates!
- This Omnirial2™ system is specifically effective with the 4G signal, but will also work with 3G as long as your device allows it. This set, made for enhancing the Multitech MultiConnect MTR-G3 signal strength and data throughput, includes the Omnirial2™ and 30 feet of dual WRG400 ultra-low loss coaxial cable for direct connection to the Multitech MultiConnect MTR-G3.
- The Omnirial2™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 65°. This Omnirial2™ system is made for the Multitech MultiConnect MTR-G3 (SKU NA-MLT-MTRG3-OMR2) and is mainly recommended for Outdoors (Pole) applications.
- *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed Omnirial2™ located substantially higher than the Multitech MultiConnect MTR-G3 location. The Omnirial2™ itself measures 3.1 x 15 x 8.5 inches and weighs 3.4 lbs. One year manufacturer warranty included.
