Product Description
If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems.
TFT35 E3 V3.0 Product characters：
1）Use the light-emitting encoder, press the bright blue light, if not, it will not light, Full of technology；
2）TFT touch screen mode：serial port screen RS232 port； 3）2 sets of UART serial port extension ports are reserved for DIY use.
SKR MINI E3 Features:
Carries highly modular open source firmware Marlin 2.0, which facilitates user DIY and secondary development;
PCB board wiring is rigorous and beautiful, and has been specially optimized for heat dissipation.
Special power chip is used to support 12-24V power input.
Acceptable 24V input, the same power can reduce the hot bed current to 1/4, effectively solve the hot bed.MOS tube heating problem;
Upgrading firmware by SD card makes operation simple and convenient.
Firmware is used to set the driving current so as to avoid burning out the driving caused by manual regulation of the current.Convenient, safe and reliable.
Note: Please contact us when you need firmware information or a manual.
TFT35 E3 V3.0 Product characters：
1）Use the light-emitting encoder, press the bright blue light, if not, it will not light, Full of technology；
2）TFT touch screen mode：serial port screen RS232 port； 3）2 sets of UART serial port extension ports are reserved for DIY use.
SKR MINI E3 Features:
Carries highly modular open source firmware Marlin 2.0, which facilitates user DIY and secondary development;
PCB board wiring is rigorous and beautiful, and has been specially optimized for heat dissipation.
Special power chip is used to support 12-24V power input.
Acceptable 24V input, the same power can reduce the hot bed current to 1/4, effectively solve the hot bed.MOS tube heating problem;
Upgrading firmware by SD card makes operation simple and convenient.
Firmware is used to set the driving current so as to avoid burning out the driving caused by manual regulation of the current.Convenient, safe and reliable.
Note: Please contact us when you need firmware information or a manual.
Product Information
- TFT35 E3:ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
- TFT35 E3:This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- TFT35 E3:LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
- SKR MINI E3:ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
