Product Information
- Michigan Service! We're located in Southeast Michigan and glad to help! Feel Free to reach-out anytime and you'll likely be chatting with me, David, to answer your questions before, and after installation. We created every aspect of our product and are excited to hear your questions about them!
- FITS: Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE, A O Smith and many more that also use the standard ¾" NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape and have plenty left over for the next time you check your anode rod’s condition. (Every Two Years).
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod Kit! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, reducing or eliminating embarrassing rotten egg smelling odors.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-By-Step, Printed instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you! The Included Brass Cap is there to place on your drain, after installation, just to be certain your floors are always dry
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), simply cut it shorter with a hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- Lifetime Socket Designed Specifically By Us and Engineered For Anode Rod Removal. The Chrome Plating Is Just Protective Bling but the Steel is Chrome Vanadium and Perfect For Abuse!
