Product Description
All persons involved must read this handbook and be completely familiar with all operating and maintenance procedures.
When operating the lever hoist, always maintain a firm footing and when necessary be secured. Operate the lever hoist from a location that will be clear of the load at all times. Never use the lever hoist to lift, support, or transport people and never list loads over or near people.
Before lifting a load, confirm that the lever hoist is in good condition and functioning properly.
Always keep the load chain well lubricated and protect it from weld spatter and other damaging contaminants. Never allow the load chain or hooks to be used as a ground for welding and never touch them with live welding electrodes. Never use the lever hoist with twisted, kinked, damaged, or worn load chains and never attempt to lengthen the load chain.
Always use proper slings and attachments in the correct manner and confirm that they are seated properly in the hook. Also confirm that the safety latch assembly has closed completely and not supporting any part of the load.
Never lift more than the rated load.
Slacked load chain must be taken up carefully. While checking the balance of the load, lift and lower the load about 4’’ to test the brake system before lifting further. Loads must be lifted slowly.
Never run the load chain out beyond the range of lift.
Never allow your attention to be diverted when operating the lever hoist and never leave a suspended load unattended.
Inspect the lever hoist regularly. Never use a lever hoist when malfunction, unusual performance, damage, or extensive wear are found.
Never adjust or repair a lever hoist unless you are qualified to perform hoist maintenance.
Never modify the lever hoist. Our approval is required for all nonstandard applications.
Use only genuine parts when repairing the lever hoist.
Never remove or obscure the name-plate on the lever hoist.
When operating the lever hoist, always maintain a firm footing and when necessary be secured. Operate the lever hoist from a location that will be clear of the load at all times. Never use the lever hoist to lift, support, or transport people and never list loads over or near people.
Before lifting a load, confirm that the lever hoist is in good condition and functioning properly.
Always keep the load chain well lubricated and protect it from weld spatter and other damaging contaminants. Never allow the load chain or hooks to be used as a ground for welding and never touch them with live welding electrodes. Never use the lever hoist with twisted, kinked, damaged, or worn load chains and never attempt to lengthen the load chain.
Always use proper slings and attachments in the correct manner and confirm that they are seated properly in the hook. Also confirm that the safety latch assembly has closed completely and not supporting any part of the load.
Never lift more than the rated load.
Slacked load chain must be taken up carefully. While checking the balance of the load, lift and lower the load about 4’’ to test the brake system before lifting further. Loads must be lifted slowly.
Never run the load chain out beyond the range of lift.
Never allow your attention to be diverted when operating the lever hoist and never leave a suspended load unattended.
Inspect the lever hoist regularly. Never use a lever hoist when malfunction, unusual performance, damage, or extensive wear are found.
Never adjust or repair a lever hoist unless you are qualified to perform hoist maintenance.
Never modify the lever hoist. Our approval is required for all nonstandard applications.
Use only genuine parts when repairing the lever hoist.
Never remove or obscure the name-plate on the lever hoist.
Product Information
- Lightweight robust construction
- High strength alloy loadchain
- Fully enclosed gear train
- Chrome plated covers
- Galvanized hand and load chain
