Product Information
- The red wire is connected to the input (ie plug) live wire. Toucher wiring method: The black wire is the common neutral wire (connected to the neutral wire of the input and output respectively) The white wire is connected to the output live wire of the light source (i.e. bulb) The yellow wire with the ground wire ear should be connected to the ground (that is, the lamp base Metal parts)
- Due to energy-saving lamps are not dimmable, and so was the third gear touch sensors only applies to ordinary light bulbs (1A: less 60W; 3A: 120W or less), not adapted to energy-saving lamps and LED lamps.
- Touch Control Sensor wiring method
- Black lines are shared zero (which are connected to the input and output of the zero line)
- If you have any problems, please feel free to contact us.
- The lamp body connected to the yellow wire must be metal, for example, plastic or plastic heads cannot be used.
- Also can used a black wire to power the device not red then used the red wire to the bulb(s). The white wire should always go to the neutral
- Three gears: low, medium, high,
