Product Information
- Features: The new design, LCD large screen display, nice. Mcu computer thermostat set temperature PID loop power control, temperature control more accurate. Selection of imported high-temperature heating material body heat, long service life. Programmable three quick temperature setting, facilitate different applications. Temperature display can be any conversion between Fahrenheit and Celsius, user-friendly habits. Intelligent temperature correction can be quickly
- corrected by replacing the tip appears when the temperature deviation. Damage the heating element failure alarm function. Parameters: Input voltage: 220VAC ¡À 10% 50Hz; Power consumption: 60W; Temperature range: 200 ¡ã C ~ 480 ¡ã C; Setting method: button adjustment, quick access; Temperature stability: ¡À 1 ¡ã C (static); Display: HD LED; Maximum ambient temperature: 40 ¡ã C; School-temperature method: digital calibration; School temperature range: -50 ¡ã C ~ 50 ¡ã C;
- Tip-to-ground resistance: <2¦¸ ; Tip-to-ground voltage: <2mv; Heating element: ceramic two core 60W; Packing List: 1 x Device Host; 1 x Handle Parts; 1 x Iron Seat; 1 x Power Cord; 1 x Cleaning Sponge; When the power is turned on, the tip temperature is hot. Given the abuse may cause burns or fires, please observe the following matters: Do not touch the metal parts of the tip nearby. Do not use near flammable objects tip. Notify other personnel workshop, tip burn easily,
- may lead to dangerous accidents at rest or after completion should turn off the power. When replacing parts or devices tip, turn off the power, and until the tip is cooled to room temperature. To avoid damaging the welding station and safe working environment, shall comply with the following: This product uses a three-wire grounding plug must be inserted into the three-hole grounded outlet. Do not change the plug or use an ungrounded three adapters leaving poorly grounded.
- For an extension cord, use a grounded three-wire power cord. Never use welding tip to work outside. Do not knock the table to remove residual iron, a move that could seriously damage the earthquake iron. Never tamper welding sets. Never use welding sets wet welding sets, or when your hands are wet. Welding will smoke, workshops should have good ventilation. Without any possible physical injury or damage to objects frivolous when using soldering station.
