Product Description
Tabiger solder remover kit, your must-have tool for soldering and desoldering.
Specification:
Material: aluminum + plasic
Size of solder sucker: 7.48"X0.79”
Size of solder wick: 2.2"X0.2”
Weight of solder sucker: 32g
Weight of solder wick: 10g
How to Use the Desoldering Pump
◆Step 1: Press the plunger down until you hear a click sound;
◆Step 2: Heat up solder around item to be removed by using a soldering iron;
◆Step 3: When the solder is liquid , place the tip of the solder sucker next to the liquid and press press the trigger;
◆Step 4: Repeat this process if necessary.How to Use the Solder Wick.
How to Use the Solder Wick
◆Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
◆Step 2: Remove the wick once the solder has been absorbed;
◆Step 3: Cut off the used part of the wick;
◆Step 4: Repeat this process if needed.
Package included:
3*solder sucker
2*solder wick(2.5mm wide and 1.5m in length)
Specification:
Material: aluminum + plasic
Size of solder sucker: 7.48"X0.79”
Size of solder wick: 2.2"X0.2”
Weight of solder sucker: 32g
Weight of solder wick: 10g
How to Use the Desoldering Pump
◆Step 1: Press the plunger down until you hear a click sound;
◆Step 2: Heat up solder around item to be removed by using a soldering iron;
◆Step 3: When the solder is liquid , place the tip of the solder sucker next to the liquid and press press the trigger;
◆Step 4: Repeat this process if necessary.How to Use the Solder Wick.
How to Use the Solder Wick
◆Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
◆Step 2: Remove the wick once the solder has been absorbed;
◆Step 3: Cut off the used part of the wick;
◆Step 4: Repeat this process if needed.
Package included:
3*solder sucker
2*solder wick(2.5mm wide and 1.5m in length)
Product Information
- 【One-handed Use Desoldering Pump】The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
- 【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
- 【Alloy Braided Solder Wick】Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
- 【Durable Desoldering Iron Kit】The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
- 【A Must-have Solder Removal Kit】The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
